White Color Latex Glue 5x5mm 160g Fiberglass Mesh For Wall And
Roofing
Introduction
Fiberglass mesh is mainly alkali-resistant fiberglass or E-glass
fabric, then coated by alkaline resistant latex. It has high
alkaline-resistant, high strength, etc. As an ideal engineering
materilas is construction it is mainly used to reinforce cemetn,
stone, wall materials, roofing, amd gypsum and so. Due to the
special nature of the material is more sturdy than other common
cloth.
we are professional supply various fiberglass mesh products and we are the
source in China, and we have been in this line more than ten years,
and fiberglass mesh cloth is base alkali or glass fiber woven
fabric as the foundation, the alkali resistant coating. The product
high strength, good paste, docile, excellent positioning, widely
applies to the wall, the external wall thermal insulation,
waterproof, etc, also can be used in cement, plastic, asphalt, marble mosaic, wall materials,
construction industry.
Specification
Material of the base:Fiberglass yarn
Type of weave (name):Leno
Hole Size:2.8x2.8mm,4x4mm,5x5mm,10x10mm
Colored fibers woven:White,Green,Blue,Orange,and any color
Coating:Latex Coating, Urea Coating
Length of the roll:30m,50m,100m.
Height of the roll:0.2m,0.5m,1m,1.2m,1.5m,1.8m,
Weighting:45g,80g,100g,110g,120g,150g,160g and so on.
| NO. | Specifications | Mesh size
mm | Yarn density
(tex) | Mass
g/m2 | Tensile strength
N/5X20cm |
| warp | weft | warp | weft | warp | weft |
| 1 | 4×4-75 | 4 | 4 | 48/2 | 200 | 75±3 | 700 | 850 |
| 2 | 4×4-90 | 4 | 4 | 67/2 | 200 | 90±3 | 950 | 1100 |
| 3 | 4×4-145 | 4 | 4 | 134/2 | 240 | 145±5 | 1500 | 1500 |
| 4 | 4×4-160 | 4 | 4 | 134/2 | 300 | 160±5 | 1500 | 1650 |
| 5 | 4×5-110 | 4 | 5 | 100/2 | 360 | 110±5 | 1100 | 1200 |
| 6 | 4×5-125 | 4 | 5 | 100/2 | 280 | 125±5 | 1200 | 1300 |
| 7 | 4×5-145 | 4 | 5 | 134/2 | 300 | 145±5 | 1400 | 1400 |
| 8 | 4×5-160 | 4 | 5 | 134/2 | 360 | 160±5 | 1500 | 1600 |
| 9 | 5×5-90 | 5 | 5 | 67/2 | 240 | 90±3 | 950 | 1150 |
Usage
1. 75g / m2 or less: Used in the reinforcement of thin slurry, to
eliminate small cracks and scattered throughout the surface
pressure.
2. 110g / m2 or about: Widely used in indoor and outdoor walls,
prevent the various materials (such as brick, light wood,
prefabricated structure) of treatment or caused by a variety of
expansion coefficient of wall crack and break .
3. 145g/m2 or about: Used in the wall and be mixed in various
materials (such as brick, light wood, prefabricated structures), to
prevent cracking and scatter the whole surface pressure, especially
in the external wall insulation system (EIFS ).
4. 160g / m2 or about: Used in insulator layer of reinforcement in
the mortar, through shrinkage and temperature changes by providing
a space to maintain movement between the layers, prevent crack and
rupture due to shrinkage or temperature
Quality A: Emulsion coated, flexible, high strength, top quality.
(emulsion)
Quality B: Emulsion coated, but lower strength than quality
A.(emulsion)
Quality C: Urea resin coated, normal quality.(urine)
Feature
1. Good alkali resistance corrosion resistance
2. High tensile strength and resistance to impact
3. Godd stability and resistance to deformation capacity
4. Temperature stability and resistance
